Author Topic: [MX-80] [JunOS] Upgrade from 11.4R1.14 to 13.3R5.9  (Read 2614 times)

jaur

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
[MX-80] [JunOS] Upgrade from 11.4R1.14 to 13.3R5.9
« on: March 17, 2015, 03:30:09 pm »
Hello all.
I'm tried to upgrade from 11.4R1.14 to 13.3R5.9. Before upgrade I'm validate jinstall, but it's failed with message:
Code: [Select]
> request system software validate /var/tmp/jinstall-ppc-13.3R5.9-domestic-signed.tgz
...
Validating against /config/juniper.conf.gz
mgd: error: Check-out failed for Adaptive services process (/usr/sbin/spd) without details
mgd: error: configuration check-out failed
Validation failed
WARNING: Current configuration not compatible with /var/tmp/jinstall-ppc-13.3R5.9-domestic-signed.tgz

How I can resolve it? I would be very grateful for any help

michaelnwr

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: [MX-80] [JunOS] Upgrade from 11.4R1.14 to 13.3R5.9
« Reply #1 on: July 22, 2015, 02:02:56 pm »
try using:
request system software validate /var/tmp/jinstall-ppc-13.3R5.9-domestic-signed.tgz force

otherwise you might have to use no-validate to do the upgrade.

TITAN_Q5

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: [MX-80] [JunOS] Upgrade from 11.4R1.14 to 13.3R5.9
« Reply #2 on: September 24, 2016, 12:41:47 am »
Note no-validate no-copy at the end of the jinstall command help but the bigger issue here is ur config may need to be tweaked . It may be useful to have console access handy when trying out those


Sent from my iPhone using Tapatalk