JuniperForum.com

Security => NetScreen and SSG/ISG Series Firewalls => Topic started by: Monkfish on January 26, 2017, 10:14:16 am

Title: Clearing Alarms
Post by: Monkfish on January 26, 2017, 10:14:16 am
Hi,

I have an SSG350M which somebody in the team attempted to access multiple times inputting the wrong password, now when I'm on the CLI I continually get

ALARM [ID 1]: Multiple login failures occurred for...
ALARM [ID 1]: Multiple login failures occurred for...
ALARM [ID 1]: Multiple login failures occurred for...
and on, and on.....

Filling up the screen, it's causing me issues when I'm using it. Can anyone tell me how to clear the alarm notification?

Many thanks.
Title: Re: Clearing Alarms
Post by: pswolfwind on March 30, 2017, 01:25:47 am
I'm having the exact same issue too! Hope someone can help on this issue.
Title: Re: Clearing Alarms
Post by: pswolfwind on May 21, 2017, 08:22:55 pm
Hi Monkfish,

I finally managed to clear these alarms on my firewall. Here's how I did it.
   
1. Use “get alarm security all” the "ACK ID: " is what you should look for.
2. Use "exec alarm ack-id" to acknowledge the alarm with the ID shown in previous command.