Author Topic: WXC Behind Firewall  (Read 3105 times)

Vijayaraj

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
WXC Behind Firewall
« on: August 19, 2007, 02:07:51 am »
Hi,

    I am implementing, a setup for 2 WXC Devices over Internet.  Those 2 Devices are behind Firewall. the first Device which is behind the firewall have a public IP Address and another device which is behind the firewall has Private IP address.

The problem here is, Tunnels are not getting established.

Is there any solutions for this type of Implementations.

Regards
Vijayaraj.T


 

budfox

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: WXC Behind Firewall
« Reply #1 on: September 07, 2007, 12:16:10 pm »
IP addresses shouldn't be a problem.

Do you have TCP and UDP ports 3577 and 3578 open in the firewalls? As well as IPComp protocol number 108?

Vijayaraj

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: WXC Behind Firewall
« Reply #2 on: September 08, 2007, 12:06:46 am »
Its just an update to query.
I have resolved this issue & its working fine.

communication between WXC to WXC happens on their own IP Address. On Firewall we have to configure in such a way that both the device should communicate through their OWN IP Address.

Regards
Vijayaraj.T