Author Topic: Security Policiesto allow specefic  (Read 286 times)

dtawk

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Security Policiesto allow specefic
« on: March 21, 2018, 07:52:18 am »
Dear All,

I am new to Juniper and I am facing an issue with my SRX.
I have added a security policy in which i have allowed access to specific IPs from the outside, but I was surprised when I discovered that the policy is not applied and the access is open to ANY.

Can you help please.

set security policies from-zone Out to-zone WAF-WAN policy his-bi_out match source-address ICT_TEAM
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out match destination-address srv_his-bi-group_out
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out match application junos-https
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out match source-identity any
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out then permit
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out then log session-init
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out then log session-close
set security policies from-zone Out to-zone WAF-WAN policy his-bi_out then count