Author Topic: How to enable ether-channel on SRX650 running Active/Standby Mode  (Read 2505 times)

firsttimer

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
How to enable ether-channel on SRX650 running Active/Standby Mode
« on: September 04, 2012, 01:33:05 am »

Hi All,

i have SRX 650 running in Active Standby mode,  im creating a new firewall segment in which it will be connected to  2 switches,  i would like to enable etherchannel.

fw1 - ge2/0/1 and ge2/0/9
fw2 - ge11/0/1 and ge11/0/9

these will be part of redundant reth6.
reth6 will be part of External-Zone


Can someone help me how to eanble it

screenie.

  • Global Moderator
  • Atomic Playboy
  • *****
  • Posts: 1315
  • Karma: +1/-0
    • View Profile
Re: How to enable ether-channel on SRX650 running Active/Standby Mode
« Reply #1 on: September 15, 2012, 05:37:46 pm »
Just add two members from each node to the reth interface........ You can also enable LACP if you need that.
Regards, Screenie
------------------------
JNSS, JNCIA, JNCIS, JNCIP, JNCI