Author Topic: Help meIn MX960, create gre interface but not present.  (Read 3840 times)

william.china

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Help meIn MX960, create gre interface but not present.
« on: September 03, 2012, 02:18:56 am »
In mx960, there have two line-cards of DPCE-R-40GE-TX.   And I create gre interface but cannot see it by "show interface gr-* terse" commands.

Could someone encounter this kind of issue?  Here comes my configuration for mx960.


william.china

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Help me In MX960, create gre interface but not present.
« Reply #1 on: September 03, 2012, 02:23:07 am »
chassis {

    fpc 1 {
        pic 0 {
            tunnel-services {
                bandwidth 1g;
            }
        }
    }

......


    gr-1/0/10 {
        unit 0 {
            tunnel {
                source 183.133.x.x;
                destination 211.136.y.y;
                key 1350;
            }
            family inet {
                address 192.168.0.59/16;
            }
        }
    }

{master}
eric@WF-GPRS-MX960-01-RE0> show interfaces gr* terse
Interface               Admin Link Proto    Local                 Remote
gre                     up    up 

screenie.

  • Global Moderator
  • Atomic Playboy
  • *****
  • Posts: 1315
  • Karma: +1/-0
    • View Profile
Re: Help meIn MX960, create gre interface but not present.
« Reply #2 on: September 13, 2012, 04:35:38 pm »
Is there a services pic installed in the chassis?
Regards, Screenie
------------------------
JNSS, JNCIA, JNCIS, JNCIP, JNCI