Author Topic: moving from ScreenOS to JunOS bgroup to ethernet-switching question  (Read 3347 times)

SMabille

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Hi,

Moving from ScreenOS 6.3 to JunOS 11.2 (R6.3).

On ScreenOS I had a bgroup with several fe ports. Under that bgroup I had several VLAN each with a DHCP server service attached.

So:
bgroup0 untagged vlan address 192.168.1.1/32, dhcp 192.168.1.0/24
bgroup0.1 vlan 10 address 192.168.10.1/32, dhcp 192.168.10.0/24

I'm struggling to get the same under Junos.
It seems that I can only use DHCP server for interface with an IP address, not part of:
family ethernet-switching { port-mode trunk { vlan members all
with two vlan.0 defined (default with 192.168.1.1/32 address and vlan.10 with 192.168.10.1/32) and the relevant dhcp pool.

How can I replicated/obtain the same facility with Junos?

THANKS

SMabille

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: moving from ScreenOS to JunOS bgroup to ethernet-switching question
« Reply #1 on: June 19, 2012, 04:25:27 am »
Solved.

russo

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: moving from ScreenOS to JunOS bgroup to ethernet-switching question
« Reply #2 on: July 03, 2012, 05:28:58 am »
Put the solution here...  :-)