Author Topic: VLAN Routing EX2200  (Read 3728 times)

RickJensen

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
VLAN Routing EX2200
« on: October 26, 2011, 06:49:52 pm »
We are trying to set up an EX-2200 to route between two VLANs. Basically, we have our 1.x network and our 2.x network in two separate buildings. We have run fiber between them and have it connected. The EX-2200 is split into two VLANs, one for the 1.x network and one for the 2.x network. We just need the fiber to plug in to the 1.x VLAN, and everything else will plug in to the 2.x VLAN and need to go back across the fiber to our main building where our router is. We have tried everything we can think of. Is this even possible?

muppet

  • Global Moderator
  • Full Member
  • *****
  • Posts: 211
  • Karma: +0/-0
  • I Like Beer
    • View Profile
    • LiCe for EPIC5
Re: VLAN Routing EX2200
« Reply #1 on: October 28, 2011, 03:25:40 am »
Are you able to do a simple diagram of what you're trying to achieve?

I'm sure it's possible - But I can't quite understand what you want from your words.