iPhone VPN to SRX

Latest Knowledgebase Articles

How to run the NSM GUI under Mac OS X
How to setup a route-based VPN on a NetScreen
How to make your PPTP VPN client work through a NetScreen/SSG
Setting up a dial-up VPN and NetScreen Remote
How the Global Zone Works (It's probably not what you think)
How to configure NetScreen/SSG devices to work with the built in Mac OS X VPN client
How to Configure Dial-up VPN with route-based tunnels, XAuth, and use IPSecuritas

JuniperForum.com > Security > SRX Platform and J-series Enhanced Services > Topic: iPhone VPN to SRX

Pages: [1]

« previous next »

Author

Topic: iPhone VPN to SRX (Read 1318 times)

ctr

Newbie

Posts: 12

iPhone VPN to SRX

« on: March 11, 2010, 09:43:13 AM »

has anyone managed to build an IPSec VPN from an iPhone to a SRX? Could this be done with the dynamic-vpn feature and/or the built-in iphone IPSec client?


	Logged

mcastro

Newbie

Posts: 2

Re: iPhone VPN to SRX

« Reply #1 on: April 14, 2010, 02:34:35 PM »

The new iPhone 4.0 has now an IPSec VPN option on the configuration.
I did not have time to test it with the SRX yet, as I'm using cert auth and the new iPhone IPSec asks for shared secret.

The Dynamic-VPN can not be downloaded on an iPhone, as only Apple APIs are allowed on the new OS version and all apps shoud be donwloaded through the App Store.


	Logged

ctr

Newbie

Posts: 12

Re: iPhone VPN to SRX

« Reply #2 on: April 14, 2010, 04:54:52 PM »

IPSec VPN is no new feature of OS 4.0, this is supported since 3.0 (or even earlier?). I also know that the https-part of dynamic VPN will not work, but that does nothing else than to download a (preconfigured) IPSec client, afaik dynamic VPN should also work with a standard IPSec client.


	Logged

aweck

Sr. Member

Posts: 422

Re: iPhone VPN to SRX

« Reply #3 on: April 14, 2010, 05:09:13 PM »

What will be new for iPhone 4.0 is JUNOS Pulse.


	Logged

JNCIE-ER #63, JNCIP-M #1076, JNCIS-SEC, JNCIS-FWV, JNCIS-SSL, JNCIA-EX, JNCIA-WX
http://www.hicnetworks.com/

ctr

Newbie

Posts: 12

Re: iPhone VPN to SRX

« Reply #4 on: April 14, 2010, 05:16:18 PM »

But afaik thats for SA only (SSL-VPN), not SRX (IPSec)


	Logged

mcastro

Newbie

Posts: 2

Re: iPhone VPN to SRX

« Reply #5 on: April 14, 2010, 06:17:45 PM »

iPhone 4.0 will also officialy support SSL-VPN from Juniper.

IPSec VPN was working only with a pre-installed client by Cisco


	Logged

aweck

Sr. Member

Posts: 422

Re: iPhone VPN to SRX

« Reply #6 on: April 14, 2010, 06:18:34 PM »

True... it would be cool if Juniper eventually rolled in an IPSec client too, seeing as how NS Remote is no longer. I don't know if this will be the case though.


	Logged

JNCIE-ER #63, JNCIP-M #1076, JNCIS-SEC, JNCIS-FWV, JNCIS-SSL, JNCIA-EX, JNCIA-WX
http://www.hicnetworks.com/

aweck

Sr. Member

Posts: 422

Re: iPhone VPN to SRX

« Reply #7 on: May 21, 2010, 06:49:41 AM »

According to Juniper webcast yesterday, Pulse 1.0 will support Dynamic VPN's to the SRX. (No ScreenOS VPN support only SRX.)


	Logged

JNCIE-ER #63, JNCIP-M #1076, JNCIS-SEC, JNCIS-FWV, JNCIS-SSL, JNCIA-EX, JNCIA-WX
http://www.hicnetworks.com/

ctr

Newbie

Posts: 12

Re: iPhone VPN to SRX

« Reply #8 on: June 26, 2010, 10:05:12 AM »

iOS 4.0 is out, but where is Pulse for iPhone? it was even mentioned in Apple's release notes, but I can't find it in the app store...


	Logged

mobme30

Newbie

Posts: 3

Re: iPhone VPN to SRX

« Reply #9 on: July 27, 2010, 12:38:01 AM »

iPhone 4.0 will also officialy support SSL-VPN from Juniper.


	Logged

Just do it.This is the Nike spirit, it is my spirit.So I just love nike shoes,which I prefer nike shox. Because it helps my basketball career.

ctr

Newbie

Posts: 12

Re: iPhone VPN to SRX

« Reply #10 on: July 27, 2010, 02:37:40 AM »

Did you read this thread before posting? iOS 4.0 is the one running on iPhone 4! But it does not support SSL-VPN natively but according to the release notes through an app, that has to be released yet (by Juniper).