SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

JuniperForum.com

March 12, 2010, 12:19:09 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

News: If you have an interesting idea for an article or knowledgebase entry, please submit it!

Home

Help

Latest Knowledgebase Articles

How to run the NSM GUI under Mac OS X
How to setup a route-based VPN on a NetScreen
How to make your PPTP VPN client work through a NetScreen/SSG
Setting up a dial-up VPN and NetScreen Remote
How the Global Zone Works (It's probably not what you think)
How to configure NetScreen/SSG devices to work with the built in Mac OS X VPN client
How to Configure Dial-up VPN with route-based tunnels, XAuth, and use IPSecuritas

JuniperForum.com > Security > NetScreen and SSG Routing > Topic: SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

Pages: [1]

« previous next »

Author

Topic: SSG 140 with - interface eth0/0.3270 encapsulation dot1Q (Read 308 times)

bluemoon55

Newbie

Posts: 20

SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

« on: February 07, 2010, 05:08:47 AM »

Hello all,,,

I have SSG 140 connecting my sidies.

and i got the fellowing configuration from my ISP to apply to my device

VLAN>>>> 3270

interface ethernet0/0.3270 encapsulation dot1Q 3270
ip address 172.XX.XX.XX/30
no shutdown

router bgp 650XX
neighbor 172.XX.XX.XX remot-as 65000
no autosummary

So how can i apply the subint and the encap dot1q
where as the SSG140 support subint only up to 100 and support pppoe encapsulaton only

Thank's in advance


	Logged

bluemoon55

Newbie

Posts: 20

Re: SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

« Reply #1 on: February 14, 2010, 01:25:32 AM »

hellow,,,, no bady is here


	Logged

mwdmeyer

Full Member

Posts: 206

Re: SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

« Reply #2 on: February 14, 2010, 03:35:24 AM »

I don't think it matters what the sub interface number is.

So just try:
interface ethernet0/0.99 encapsulation dot1Q 3270


	Logged

bluemoon55

Newbie

Posts: 20

Re: SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

« Reply #3 on: February 14, 2010, 04:18:29 AM »

i'll try it, and will let u know

thanks for replaying


	Logged

bluemoon55

Newbie

Posts: 20

Re: SSG 140 with - interface eth0/0.3270 encapsulation dot1Q

« Reply #4 on: February 14, 2010, 04:51:25 AM »

i tryed it

i got

set int eth0/2.99 tow options

1) encap encapsulation type
a) pppoe (got only this option)

2) tag 802.1Q vlan tag

i'll try the tag option and let u know what happen